Fine-tune your LEDs
There’s a reason why lighting designers are turning to our Zircon filters for their LEDs. It’s because they’ve been specifically designed to fine-tune the inconsistencies often associated with LED lighting, ensuring your LEDs give the same performance, time and time again.
Quick Introduction to the Zircon Range
Zircon is a new concept in LED filter design that has been designed from the ground-up for exceptional performance with LED Lights.
Watch the video to learn why it's so special.
Longer Life Filters for LED
LED lighting has many benefits, but one of its stumbling blocks is that its intensity can contribute to the fade times of standard lighting filters.
In order to overcome this our Research and Development team has developed a new way of producing filters that ensures they last longer when used with LED lights.
In fact, Zircon Warm Amber filters have been shown to retain at least 80% of their effectiveness after as much as eight months of continuous use on LED downlighters.
Standard Filter
204 Full CTO
Fade after 30 hours
807 Warm Amber 4
No fade after 30 hours
Retains at least 80% effectiveness
after as much as 8 months.
Heavyweight Substrate
Not only are Zircon filters longer-lasting than their standard counterparts, they’re sturdier, too.
Manufactured using a 180-micron material, they are more than double the thickness of a normal lighting filter. This makes them more durable and easy-to-use.
Zircon Packs
Cool LED Lighting Pack
Contains 9 Zircon sheets 300mm x 300mm (12" x 12"), thickness 180 microns.
Warm LED Lighting Pack
Contains 12 Zircon sheets 300mm x 300mm (12" x 12"), thickness 180 microns.
LED Correction Lighting Pack
Contains 14 Zircon sheets 300mm x 300mm (12" x 12"), thickness 180 microns.
- 801Zircon Minus Green 1
- 802Zircon Minus Green 2
- 803Zircon Minus Green 3
- 804Zircon Minus Green 4
- 805Zircon Minus Green 5
- 806Zircon Warm Amber 2
- 807Zircon Warm Amber 4
- 813Zircon Warm Amber 5 (O32)
- 808Zircon Warm Amber 6
- 809Zircon Warm Amber 8
- 814Zircon Warm Amber 9 (R31)
- 818Zircon Cool Blue 6
- 819Zircon Cool Blue 8
- 820Zircon Cool Blue 10
WARM
The Zircon Range: Warm Amber
The Zircon Warm Amber filters correct and warm up a range of different colour temperature white LED's.
Rolls: 3.05m x 1.2m (10ft x 4ft) Sheets: 61cm x 61cm (24in x 24in) Warm LED / Correction Pack: 30cm x 30cm (12in x 12in)
Before – Unfiltered LED
After – With 808 Zircon Warm Amber 6
806 Zircon Warm Amber 2
-
Longer life filter for major warm up correction of cool white LED.
Example: 5500K LED to 3000K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
807 Zircon Warm Amber 4
-
Longer life filter for medium warm up correction of white LED.
Example: 4000K LED to 3000K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
813 Zircon Warm Amber 5 (O32)
-
Longer life filter for medium warm up correction of white LED with minus green tint.
Example: 4000K LED to 2900K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
808 Zircon Warm Amber 6
-
Longer life filter for correction of warm white LED.
Example: 3500K LED to 3000K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
809 Zircon Warm Amber 8
-
Longer life filter for fine correction of warm white LED.
Example: 3000K LED to 2700K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
814 Zircon Warm Amber 9 (R31)
-
Longer life filter for fine warm up and minus green correction of warm white LED.
Example: 3000K LED to 2600K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
COOL
The Zircon Range: Cool Blue
The Zircon Cool Blue filters cool down the colour of warm white LEDs.
Rolls: 3.05m x 1.2m (10ft x 4ft) Sheets: 61cm x 61cm (24in x 24in) Cool LED / Correction Pack: 30cm x 30cm (12in x 12in)
818 Zircon Cool Blue 6
-
Longer life filter used to cool down the colour of warm white LEDs so that they look whiter.
Example: 3000K LED to 3500K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
819 Zircon Cool Blue 8
-
Longer life filter used to slightly cool down the colour of warm white LEDs so that they look whiter.
Example: 2700K LED to 3000K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
820 Zircon Cool Blue 10
-
Longer life filter used to very slightly cool down the colour of warm white LEDs, allowing different batches of LEDs to be used together.
Example: 3000K LED to 3200K.
Colour Temperature shift varies with type of LED.
Save to list
200x Lifespan
2x Thickness
DIFFUSION
The Zircon Range: Diffusion
The Zircon Diffusion filters offer different strengths of diffusion specifically designed for LEDs.
Rolls: 3.05m x 1.2m (10ft x 4ft) Sheets: 61cm x 61cm (24in x 24in) Cool LED / Warm LED Pack: 30cm x 30cm (12in x 12in)
Before – Unfiltered LED
After – With 808 Zircon Warm Amber 6 and 812 Zircon Diffusion 3
810 Zircon Diffusion 1
-
Strongest diffusion on thick polyester for easy use on panels and in channels. Can be used close to LED chip to blur the pixels.
May cause a slight change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
811 Zircon Diffusion 2
-
Strong diffusion on thick polyester for easy use on panels and in channels. Can be used close to LED chip to provide some blurring of the pixels.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
812 Zircon Diffusion 3
-
Medium diffusion on thick polyester for easy use on panels and in channels. Provides reasonable diffusion properties without too much loss of light.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
CORRECTION
The Zircon Range: Minus Green
The Zircon Minus Green filters remove the green casts often associated with LED Lighting when using a digital camera.
Rolls: 3.05m x 1.2m (10ft x 4ft) Sheets: 61cm x 61cm (24in x 24in) LED Correction Pack: 30cm x 30cm (12in x 12in)
801 Zircon Minus Green 1
-
Longer life filter for use by photographers to remove large green casts produced by some LEDs.
Approx. equivalent - CC10M.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
802 Zircon Minus Green 2
-
Longer life filter for use by photographers to remove medium green casts produced by some LEDs.
Approx. equivalent - CC05M.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
803 Zircon Minus Green 3
-
Longer life filter for use by photographers to remove light green casts produced by some LEDs.
Approx. equivalent - CC03M.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
804 Zircon Minus Green 4
-
Longer life filter for use by photographers to remove fine green casts produced by some LEDs.
Approx. equivalent - CC02M.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
805 Zircon Minus Green 5
-
Longer life filter for use by photographers to remove tint green casts produced by some LEDs.
Approx. equivalent - CC01M.
May cause a change of Colour Temperature on some LEDs.
Save to list
200x Lifespan
2x Thickness
The Zircon Range: Density
The Zircon Density filters provide a controlled reduction in the light level of LEDs.
Rolls: 3.05m x 1.2m (10ft x 4ft) Sheets: 61cm x 61cm (24in x 24in) Cool LED / Warm LED Pack: 30cm x 30cm (12in x 12in)
815 Dark Density
-
Longer life filter for LED fixtures, used to reduce the light level by approximately 80%.
There may be a slight warming-up of the colour when used on some LED lamps.
Save to list
200x Lifespan
2x Thickness
816 Mid Density
-
Longer life filter for LED fixtures, used to reduce the light level by approximately 60%.
There may be a slight warming-up of the colour when used on some LED lamps.
Save to list
200x Lifespan
2x Thickness
817 Pale Density
-
Longer life filter for LED fixtures, used to reduce the light level by approximately 40%.
There may be a slight warming-up of the colour when used on some LED lamps.
Save to list
200x Lifespan
2x Thickness
The Zircon Range: UV Blue Blocker
This Zircon Density filter is used to block UV and blue light.
Rolls: 3.05m x 1.2m (10ft x 4ft) Sheets: 61cm x 61cm (24in x 24in)
821 UV Blue Blocker
-
Longer life filter used to block UV and blue light.
Has an optical density above 4 in the UV and visible up to 470nm.
> 1% Transmission above 505nm
Save to list
200x Lifespan
2x Thickness
Save and Print (PDF)